Specifications - Sharp PN-HW861 Operation Manual

nDDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
nCompatible signal timing (PC)
Screen resolution
VESA
1024 × 768
1280 × 800
1280 × 960
1280 × 1024
1360 × 768
1400 × 1050
1440 × 900
1680 × 1050
Wide 3840 × 2160
4096 × 2160
1280 × 720
1920 × 1080
US TEXT
*1 Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
*2 Compatible when HDMI MODES is MODE1.
• Depending on the connected computer, images may not be displayed properly even if the compatible signal described above
is input.
38
E

Specifications

Hsync
640 × 480 31.5kHz
800 × 600 37.9kHz
848 × 480 31.0kHz
48.4kHz
49.7kHz
60.0kHz
64.0kHz
80.0kHz
47.7kHz
65.3kHz
55.9kHz
65.3kHz
54.0kHz
56.25kHz
67.5kHz
112.5kHz
135kHz
*1
54.0kHz
56.0kHz
67.0kHz
112.5kHz
135.0kHz
44.7kHz
67.5kHz
720 × 400 31.5kHz
Vsync Dot frequency
60Hz 25.175MHz
60Hz 40.0MHz
60Hz 33.75MHz
60Hz 65.0MHz
60Hz 83.5MHz
60Hz 108.0MHz
60Hz 108.0MHz
75Hz 135.0MHz
60Hz 85.5MHz
60Hz 121.75MHz
60Hz 106.5MHz
60Hz 146.25MHz
24Hz 297.0MHz
25Hz 297.0MHz
30Hz 297.0MHz
50Hz 594.0MHz
60Hz 594.0MHz
24Hz 297.0MHz
25Hz 297.0MHz
30Hz 297.0MHz
50Hz 594.0MHz
60Hz 594.0MHz
60Hz 74.4MHz
60Hz 148.5MHz
70Hz 28.3MHz
Digital
Analog (D-SUB)
HDMI
Yes Yes
Yes Yes
- Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes -
Yes -
Yes Yes
Yes Yes
Yes -
Yes -
Yes -
Yes -
Yes -
Yes -
*2
Yes -
*2
Yes -
Yes -
Yes -
Yes Yes
Yes Yes
Yes Yes