Sharp HW431T-PN Operation Manual

nProduct Specifications
The following specifications will change.
Model PN-HW501T
Touch Panel Detection method Infrared blocking detection method
Computer connector USB (2.0 compliant) (In the shape of Type C) x 1
Operating temperature* * 41°F to 95°F (5°C to 35°C)
1 2
Operating humidity* 20% to 80% (no condensation)
1
Dimensions inch (mm) Approx. 45-13/16 (W) x 3-1/16 (D) x 27 (H)
(excluding protrusions) (1163 × 78 × 686)
Weight lbs. (kg) Approx. 48.5 (22)
*1 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*2 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are
satisfied.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
Dimensional Drawings
Note that the values shown are approximate values.
[PN-HW501T]
3-1/8
(Screw holes for [80]
mounting brackets)
3-1/16 [78]
45-13/16 [1163]
2-5/16 [58]
(Bracket parts)
3-1/8 [80]
[PN-HW431T]
2-13/16
(Screw holes for
[71]
mounting brackets)
2-3/4 [70]
2-3/16 [55] 39-5/8 [1007]
(Bracket parts)
2-13/16 [72]
When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious
personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of
thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the
monitor.
PN-HW431T
Approx. 39-5/8 (W) x 2-3/4 (D) x 23-9/16 (H)
(1007 × 70 × 598)
Approx. 35.3 (16)
Unit: inch [mm]
Screw holes for mounting brackets
7-7/8 7-7/8
[200] [200]
Unit: inch [mm]
Screw holes for mounting brackets
3-15/16 3-15/16
[100] [100]
Printed in China
PN-HW501T / PN-HW431T OPERATION MANUAL
PN-HW501T and PN-HW431T are monitors with a touch panel added to PN-HW501 and PN-HW431.
This manual explains the differences from PN-HW501 / PN-HW431.
Also, read the manual of PN-HW501 / PN-HW431.
nTIPS AND SAFETY INSTRUCTIONS
• Do not touch the screen with a hard or pointed object such as a fingernail or pencil.
• Depending on the application used, the touch pen may not function.
• This monitor should be used at an ambient temperature between 41°F (5°C) and 95°F (35°C).
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
Caution
• When you use a network, your communication data is exposed to the risks of being stolen or illegally accessed. To avoid these risks, you
need to use this monitor in a secure network environment.
nMOUNTING PRECAUTIONS
• Use the monitor with the surface perpendicular to a level surface. When tilting this monitor, use it within the following range.
Upward: 0° to 20°, 45°
nSupplied Components
The following components will be added.
 Touch pen: 1  Cable clamp (insertion type): 1
TIPS
• Install Pen Software and Information Display Downloader from the supplied CD-ROM.
• When the Information Display Downloader is installed, you can check and download the most recent versions of the software programs.
• Touch Viewing Software setup program can be downloaded using Information Display Downloader.
nSystem Requirements(touch panel)
Hardware Must have a USB 2.0 compliant port.
Operating system Windows 8.1 (32-bit or 64-bit version), Windows 10 (32-bit or 64-bit version)
macOS v10.15, v11.0
Google Chrome OS Version 54 or later
nConnecting to a computer
To the USB terminal
(4)
of the computer
USB cable (supplied)
(1) Connect the USB cable (supplied) to this monitor.
(2) Coil the USB cable (supplied) into two loops and secure it with the cable clamp (insertion type) (supplied).
(3) Attach the cable clamp (supplied) to this monitor.
(4) Connect the USB cable (supplied) to the computer.
TIPS
• Regardless of whether the power of the this monitor is turned on or off, the touch panel operates when power is supplied from the USB
terminal of the computer.
Even if the power of the this monitor is turned off, if power is supplied to the touch panel, any touch actions that are performed are
applied.
(1)
 USB cable (Type A to Type C): 1
Cable clamp (insertion type)
(supplied)
(2)
(3)
(1)
(3)
(3) (1) (3)