Using The Remote Control - Frigidaire EC300W-FA Owner's Manual

USING THE REMOTE CONTROL

The EC300W-FA is equipped with a remote control. A CR2032 3V coin-type
replacement battery is included for your convenience.
Pull on the back bottom of the remote
control to separate the battery
compartment. Insert the included 3V
CR2032 battery.
Please point to the EC300W-FA receiver
when using the remote control.
If the battery voltage is low, please open
the battery cover as shown in Fig.6 and
replace with a new battery (CR2032).
Please note the positive pole and the
negative pole of the battery; then insert
the battery compartment back into the
remote control.
11
(Fig. 6)