Cleaning And Maintainance; Product Storage - Frigidaire EC300W-FA Owner's Manual

CLEANING AND MAINTENANCE
1. Do not use chemical agents for cleaning.
2. Always unplug the power cord before cleaning the device to prevent
possible electrocution.
3. If dust accumulates on the outer surface of the unit, please wipe with a
damp soft cloth. Use a water and a soap mixture to clean the exterior.
4. Remove the cooling pad from the unit and check to make sure the cooling
pad is in good condition. If the pad is cracked, it will need to be replaced.
Wipe the interior clean with a damp soft cloth.
5. Rinse the cooling pad completely with clean water. Use a soft cloth to dry.
6. For a more thorough cleaning, use a mixture of water with a couple
teaspoons of distilled white vinegar or lemon juice.
7. Do not use gasoline, thinner, or any substance that may damage the unit
8. Change water in the water tank regularly. Wipe the tank clean and use
your diluted vinegar solution to remove any hard water stains in the tank.
9. Make sure the tank is completely dry and free of any leftover vinegar
residue before using the unit again.

PRODUCT STORAGE

If the product will be stored for an extended period of time, disassemble the
unit to access the water tank, drain the water, and then reassemble the unit.
Activate the Air Dry function to fully dry the cooling pad. Once complete,
unplug the power cord, pack the unit properly to prevent dust, and place in a
dry and well-ventilated place.
15