Normal Sounds ... 4 Unit Description ... 5 Accessories Included Installation Instructions www.frigidaire.com USA 1-800-944-9044 TA B L E O F C O N T E N T S Air Conditioner Features Operating Instructions ... 9-11 Care and Cleaning ... 11 Before You Call ...
Do not insert or place fingers or objects into the air discharge area on top of the unit. Do not start or stop the air conditioner by unplugging the power cord or turning off the power at the electrical box.
Do not place containers with liquids on the unit. Turn off the air conditioner at the power source when it will not be used for an extended period of time. Periodically check the condition of the unit’s installation accessories for any damage.
Model No. Serial No. Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company. Gurgle/Hiss “Gurgling or hissing” noise may be heard due to refrigerant passing through evaporator during normal operation.
Unit Description CONTROL PANEL CARRYING HANDLE (BOTH SIDES) REMOTE CONTROL Accessories Included PARTS: Check all the accessories are included in the package and please refer to the installation instructions for their usage. 2009 Electrolux Home Products, Inc. Unit Description & Accessories Included ROOM AIR DISCHARGE EXHAUST AIR OUTLET...
Installation Instructions Installation Instructions EXHAUSTING HOT AIR In the COOLING Mode the appliance must be placed close to a window or opening so that the warm exhaust air can be ducted outside. First position unit on a flat floor and make sure there’s a minimum of 12" clearance around the unit, and is within the vicinity of a single circuit outlet power source.
Page 7
Installation Instructions (continued) Installation in a double-hung sash window 1. Cut the foam seals(adhesive type) to the proper lengths and attach them to the window and stool. (Fig. 10) 2. Open the window sash and place the window slider kit on the window stool (Fig.
Air Conditioner Features Air Conditioner Features CONTROL PANEL SWING BUTTON SETS MODE SLEEP MODE REMOTE CONTROL MODE INDICATION TEMPERATURE/TIMER CONTROL BUTTONS MODE SELECTOR SLEEP BUTTON RESET + LOCK Battery Size: AAA Warning: 1. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel- cadmium) batteries.
AUTO MODE: Always have the exhaust hose attached in this mode. When you set the air conditioner in AUTO mode, it will automatically select cooling, heating(inapplicable for cooling only models), or fan only operation depending on what temperature you have selected and the room temperature. The air conditioner will control room temperature automatically round the temperature point set by you.
Page 10
If the display reads "EA" , the room temperature sensor has failed. Contact your Authorized Frigidaire Service Center. If the display reads "ES" , the evaporator temperature sensor has failed. Contact your Authorized Frigidaire Service Center. If the display reads "E4" , the display panel communication has failed. Contact your Authorized Frigidaire Service Center.
Or, instead of washing you may vacuum the filter clean. Cabinet Cleaning Be sure to unplug the air conditioner to prevent shock or fire hazard. The cabinet and front may be dusted with an oil-free cloth or washed with a cloth dampened in a solution of warm water and mild liquid dishwashing detergent.
Noise when unit is cooling. Room too cold. Room too hot. If These Solutions Fail, Call 1-800-944-9044 For Frigidaire Service. 2009 Electrolux Home Products, Inc. SOLUTION Wall plug disconnected. Push plug firmly into wall outlet. Plug Current Device Tripped. Press the RESET button.
Your appliance is covered by a limited one-year warranty and a limited 2-5 year warranty on the sealed system (the compressor, condenser, evaporator and tubing). For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.