Mounting Smart-1 25 In A Rack; Safety Instructions - Check Point Smart-1 25 Getting Started Manual

Mounting Smart-1 25 in a Rack

These instructions show how to install Smart-1 25 in a standard 19 inch rack.

Safety Instructions

Before installing your appliance in a rack cabinet, review the following guidelines:

Make sure that the room air temperature is below 35°C (95°F).

Do not block any air vents. Normally, 15 cm (6 in.) of air space in the
rear and 5 cm (2 in.) in the front provides proper airflow.

Install the appliances in the cabinet starting at the bottom and going up.

Install the heaviest appliance at the bottom of the rack cabinet.

Do not extend more than one device out of the rack cabinet at the same
time.

Connect the server to a properly grounded outlet.

Do not overload the power outlet when installing multiple devices in the
rack cabinet.
Safety Instructions
Mounting Smart-1 25 in a Rack Page 11