ADJ UV COB Manual page 5

UV COB Cannon
LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE
button until either "0010" or "0020" is displayed. Press the UP or
DOWN buttons to toggle between the two modes. Press SAVE once
you have found your desired mode.
To set the display press the MODE button until:
"0010" = LED display on at all times.
"0020" = LED display shuts off after 10 seconds.
Operating Modes:
The UV COB Cannon has three operating modes:
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller.
• UV Dimmer Mode - Adjust the intensity of UV output. You can also
apply strobing in this mode and select a dimmer curve.
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs.
DMX Mode:
Operating through a DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs. The
UV COB Cannon has 3 DMX modes: 1 Channel mode, 2 Channel
mode, and a 3 Channel mode. See page 10 for each DMX traits.
1. This function will allow you to control each individual fixture's
traits with a standard DMX 512 controller.
2. To select your desired Channel mode press the MODE button
until:
• To run the 1 Channel Mode, press the MODE button until "XXX1"
is displayed. This is the 1 Channel DMX Mode.
• To run the 2 Channel Mode, press the MODE button until "XXX2"
is displayed. This is the 2 Channel DMX Mode.
• To run the 3 Channel Mode, press the MODE button until "XXX3"
is displayed. This is the 3 Channel DMX Mode.
3. After you have chosen your desired DMX Channel mode plug in
the fixture via the XLR connections to any standard DMX control
ler.
5. Please see page 10 for DMX values and traits.
ADJ Products, LLC - www.adj.com - UV COB Cannon - User Manual Page 8
Operating Instructions
UV COB Cannon
UV Manual Dimmer Mode:
1. Plug the fixture in and press the MODE button until:
2. When "XXX4" is displayed you are in dimming mode.
Press the UP and DOWN buttons to adjust intensity.
3. When "XXX5" is displayed you are in strobing mode.
Press the UP and DOWN buttons to adjust strobing.
4. When "XXX6" is displayed you are in dimmer curve adjustment.
Press the UP and DOWN buttons to scroll through the different
curve modes. See the dimmer curve chart on page 11.
Sound Active Mode:
In this mode the UV COB Cannon will react to sound.
1. Plug the fixture in and press the MODE button until "0017" is dis-
played.
2. The fixture will now change via sound.
3. Press the UP or DOWN button so that "0027" is displayed. This
will turn sound activite mode off.
Dimmer Curve Setting:
In this menu setting you can set a dimmer curve mode. See page 12
for the different dimmer curve modes.
1. Plug the fixture in and press the MODE button until "00X6" is dis-
played.
2. "X" represents the displayed dimmer curve (0-4).
• 0 - Standard
• 1 - Stage
• 2 - TV
• 3 - Architectural
• 4 - Theatre
3. Press the UP or DOWN buttons to scroll through and select your
desired dimming curve.
ADJ Products, LLC - www.adj.com - UV COB Cannon - User Manual Page 9
Operating Instructions