ADJ UV COB Manual page 6

UV COB Cannon
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave
mode. In Master-Slave operation one unit will act as the controlling unit
and the others will react to the controlling units built-in programs. Any
unit can act as a Master or as a Slave however, only one unit can be pro-
grammed to act as the "Master."
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR data cables to link your units together. Remember
that the Male XLR connector is the input and the Female XLR con-
nector is the ouput. The first unit in the chain (master) will use the
female XLR connector only. The last unit in the chain will use the
male XLR connector only.
2. On the "Master" unit, press the MODE button until "0018" is dis-
played. This is the "Master" setting, press the SAVE button. After you
have set it to the "Master" setting, set your desired operating mode.
3. For the "Slave" unit, press the UP or DOWN button so that "0028" is
displayed. This is the "Slave" setting, press the SAVE button.
4. Now connect the "Slave" unit to the "Master" unit using the XLR con-
nections.
ADJ Products, LLC - www.adj.com - UV COB Cannon - User Manual Page 10
Master-Slave Configuration UV COB Cannon
Channel Value
1
1 - 255
UV COB Cannon
Channel Value
1
1 - 255
2
1 - 255
UV COB Cannon
Channel Value
1
1 - 255
2
1 - 255
3
0 - 20
21 - 40
41 - 60
61 - 80
81 - 100
101 - 255
ADJ Products, LLC - www.adj.com - UV COB Cannon - User Manual Page 11
1 Channel Mode
Function
DIMMING
0% - 100%
2 Channel Mode
Function
DIMMING
0% - 100%
STROBING
SLOW - FAST
3 Channel Mode
Function
DIMMING
0% - 100%
STROBING
SLOW - FAST
DIMMER CURVES
STANDARD
STAGE
TV
ARCHITECTURAL
THEATRE
DELAY MODE CONTROL