Raymarine SPX 10 Installation Instructions Manual page 20

1
P OWER
A B
1. Course computer connection panel
2. Power distribution panel
Power connection colors
Color Description
A Red Power in +ve (12 / 24 V)
B Black Power in -ve (0 V)
Drive connection
The drive connects to the connection panel of the
course computer.
20
MADE IN HUNGARY
SLEEP
12V 24V
FLUXGATE RUDDER
CLUTCH
1
A B
D11946-2
1. Clutch (not all drives have this connection)
2. Motor/drive
Clutch connection colors
Color
A Red
B Blue
Clutch voltage switch
If the drive has a separate clutch connection to the
course computer, you must ensure that the clutch
voltage switch is set correctly.
GROUND
A B
P OWER MOTOR Note: The clutch voltage may be different from that
of the drive itself, for example the range of both 12
and 24 V Raymarine drives all have a 12 V clutch.
2
Solenoid drive connection
1
D10945-1
12 V
24 V
Description
Clutch +ve
1. Electronic steering / jog lever (if required)
Clutch -ve
2. Back-feed protection diodes (if using a electronic
steering or jog lever)
3. Drive out.
4. Drive return
5. Solenoid valves (with diodes across spool valves)
Care points:
• If an electronic steering or jog lever is used, fit diodes
(suggested type: 1N4004) in line with the solenoid
outputs to prevent back-feeding the course computer.
D10452-2
A B
SOLENOID SOLENOID
2
3
4
5
D10456-2
SPX10, SPX30, SPX-SOL