Advan 240-030-970 User Manual page 7

1. Keep the unit away from equipment that uses strong magnets (i.e., large
loudspeakers).
16. Do not touch the patient with signal input or output connectors.
Equipment with SIP/SOP connectors should either comply with IEC
60601-1 and/or IEC 60601-1-1 harmonized national standards or the
combination should be evaluated.
17. CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note
• Reorient or relocate the receiving device.
• Increase the separation distance between the equipment.
• Connect the equipment to an outlet on a circuit different from that
to which the other device(s) are connected.
• Consult the manufacturer or field service technician for help.
18. To ensure electromagnetic compatibility, refer to the "Electromagnetic
Compatibility" section of this manual. The VISION ELECT WHDTV
(model 240-030-970) display must be installed and operated according
to the EMC information provided in this manual.
The VISION ELECT WHDTV (model 240-030-970) display has been tested
under the UL 60601-1 standard and is UL listed for medical application.
The warranty is void if any of these warnings or cautions are disregarded.
This equipment has been tested and found to comply with
the limit for a Class B digital device, pursuant to Part 1
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. There is no guarantee
that interference will not occur in a particular installation,
which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one
or more of the following measures:
7