Add Ringing Tones For Contacts; Create Contact Groups - Nokia N71 User Manual

R1114_en.book Page 56 Tuesday, January 24, 2006 2:04 PM
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.

Add ringing tones for contacts

When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller's phone
number is sent with the call and your device recognizes
it).
1 Press to open a contact card or go to the groups
list, and select a contact group.
2
Select Options > Ringing
opens.
3 Select the ringing tone you want to use for the
individual contact or the selected group.
To remove the ringing tone, select
list of ringing tones.

Create contact groups

1 In Contacts, press to open the groups list.
2
Select Options > New group.
3
Write a name for the group or use the default name
Group , and select OK.
4
Open the group, and select
56
5
Scroll to a contact, and press
multiple members at a time, repeat this action on all
the contacts you want to add.
6
Select
To rename a group, select
new name, and select OK.
Remove members from a group
1 In the groups list, open the group you want to modify.
2 Scroll to the contact, and select
from
3 Select
tone. A list of ringing tones
Tip! To check to which groups a contact belongs,
scroll to the contact, and select
groups.
Default tone from the
Options > Add members.
to mark it. To add
OK to add the contacts to the group.
Options > Rename, enter the
Options > Remove
group.
Yes to remove the contact from the group.
Options > Belongs to