Add Ringing Tones For Contacts - Nokia N71 User Manual

R1114_en.book Page 63 Friday, September 16, 2005 9:36 AM
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.

Add ringing tones for contacts

When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller's telephone
number is sent with the call and your device recognizes it).
1 Press to open a contact card or go to the groups list,
and select a contact group.
2 Select Options > Ringing tone. A list of ringing tones
opens.
3
Select the ringing tone you want to use for the
individual contact or the selected group.
???You can also use a video clip as a ringing tone.???
To remove the ringing tone, select Default tone
list of ringing tones.
Create contact groups
1
In Contacts, press to open the groups list.
2 Select Options > New group.
3
Write a name for the group or use the default name
Group %N, and select OK.
4 Open the group, and select Options
5 Scroll to a contact, and press
multiple members at a time, repeat this action on all
the contacts you want to add.
6
Select OK to add the contacts to the group.
To rename a group, select
new name, and select OK.
Remove members from a group
1
In the groups list, open the group you want to modify.
2
Scroll to the contact, and select
from group.
3
Select Yes to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select
groups.
from the
> Add members.
to mark it. To add
Options > Rename, enter the
Options > Remove
Options > Belongs to
63