Your Nokia N71; Settings; Transfer Content - Nokia N71 User Manual

R1114_en.book Page 9 Tuesday, January 24, 2006 2:04 PM

Your Nokia N71

Model number: Nokia N71
Hereinafter referred to as Nokia N71.

Settings

Your Nokia N71 normally has MMS, GPRS, streaming, and
mobile Internet settings automatically configured, based
upon your service provider or network operator
information. You may have settings from your service
providers already installed in your device, or you may
receive the settings from the service providers as a special
text message.

Transfer content

You can copy content such as contacts and calendar
entries from a compatible Nokia device to your Nokia N71
using Bluetooth connectivity or infrared. The type of
content that can be copied depends on the device model.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
You can insert your SIM card in the other device. When
Nokia N71 is switched on without a SIM card, the offline
profile is automatically activated.
To avoid duplicate entries, you can transfer the same type
of information (for example, contacts) from the other
device to your Nokia N71 only once.
Transfer content
1
Press , and select Tools > Transfer
your Nokia N71.
2 In the information view, select Continue.
3 Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
4 If you select Bluetooth connectivity to search for
devices, select Continue. The visibility of the other
device must be on. Select your other device from the
list. You are asked to enter a code on your Nokia N71.
Enter a code (1–16 digits), and select OK. Enter the
same code on the other device, and select OK. The
devices are now paired. See 'Pair devices', p. 72.
For some device models, the Transfer
sent to the other device as a message. To install
Transfer on the other device, open the message, and
follow the instructions on the display.
> Copy data on
application is
9