Nokia N71 User Manual page 88

R1114_en.book Page 88 Tuesday, January 24, 2006 2:04 PM
addresses of the primary and secondary DNS server.
Contact your Internet service provider for these addresses.
IPv6 settings > DNS address—Select Automatic,
known, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select
Proxy serv. address—Enter the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select When
packet data connection only if you start an application or
action that needs it.
Access point—The access point name is needed to use
your device as a packet data modem to your computer.
88
Configurations
You may receive trusted server settings from your network
Well- operator or service provider in a configuration message, or
the settings may be stored on your SIM card. You can save
these settings to your device, view, or delete them in
Configurations.
User defined.
See 'Clock settings', p. 12, and language settings in
'General', p. 83.
When available and you
Phone and SIM
PIN code
each time the device is switched on. Deactivating the
needed, the device uses a
personal identification number (PIN) code request may not
be allowed by some SIM cards. See 'Glossary of PIN and
lock codes', p. 89.
PIN code,
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
Date and time
Security
request—When active, the code is requested
PIN2 code, and Lock code—You can change the