Log - Nokia N71 User Manual

R1114_en.book Page 51 Tuesday, January 24, 2006 2:04 PM
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Transfer . To end the active call, press
calls, select Options > End all calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options
of the following options: Mute or Unmute, Answer,
Reject, Swap, Hold or Unhold, Activate
loudsp., or Activate handsfree (if a compatible headset
with Bluetooth connectivity is attached),
or End all calls, New call, Conference, and Transfer.
Select from the following:
Replace—To end an active call and replace it by answering
the waiting call.
Send DTMF—To send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press repeatedly. Select
tone.
Tip! You can add DTMF tones to the
or DTMF fields in a contact card.
Tip! If you select Activate loudsp., you can close the
cover and continue the call.

Log

Options >
. To end both
Recent calls
To monitor the phone numbers of missed, received, and
dialed calls, press
calls. The device registers missed and received calls only if
the network supports these functions, the device is
during a call for some
switched on, and has network coverage.
handset, Activate
Tip! When you see a note in the standby mode about
missed calls, select
End active call
calls. To call back, scroll to a name or number, and
press
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear
register, scroll to the event, and press
Call duration
OK to send the
To monitor the approximate duration of your incoming
Phone number
and outgoing calls, press
Call duration.
, and select My own > Log > Recent
Show to access the list of missed
.
Options > Clear recent
list. To clear an individual event, open a
.
, and select My own > Log >
51