Battery Replacement - Tunstall Fall Detector User Manual

Battery Replacement

From time to time the battery will need replacing, you will
know this because somebody from your monitoring service
(if you have one) may inform you, or you may see the red
light flashing rather than staying on continuously when a
manual alarm call is made.
• The unit automatically tests the battery several
times within each 24 hour period. It is able to
automatically generate an alarm call when low
battery is detected.
• If it is necessary for you to change the battery, the
fall detector uses a 6 volt Duracell PX28L battery.
• After a year the battery should be replaced. Contact
your provider for a replacement. In many cases your
provider will change the battery for you. On the back
of this user guide is a handy table to help you
remember when the battery should be changed.
Installation and User Guide
Page 6 of 10