Garmin G1000 Pilot's Manual page 25

• INSET
OFF
DCLTR (3) Selects desired amount of map detail; cycles through declutter levels:
TRAFFIC
TOPO
TERRAIN
NEXRAD
XM LTNG
OFF
• PFD
METRIC
METRIC
DFLTS
DME
BRG1
360 HSI
ARC HSI
190-00595-00 Rev. A
Displays Inset Map in PFD lower left corner
Removes Inset Map
DCLTR (No Declutter): All map features visible
DCLTR-1: Removes land data
DCLTR-2: Removes land and SUA data
DCLTR-3: Removes everything except active flight plan
Displays/removes traffic information on Inset Map
INSET PFD OBS
Displays/removes topographical data (e.g., coastlines, terrain, rivers, lakes) on Inset Map
Displays/removes terrain information on Inset Map
Displays/removes NEXRAD weather and coverage information on Inset Map (optional)
Displays/removes XM lightning information on Inset Map (optional)
INSET
DCLTR TRAFFIC TOPO
DCLTR-1
DCLTR-2
DCLTR-3
Figure 1-14 INSET Softkeys
PFD
Displays second-level softkeys for additional PFD configuration
Displays Selected and current altitudes additionally in meters and changes barometric
(optional)
setting to hectopascals (hPa) from inches of mercury (in Hg)
DFLTS DME BRG 1
Resets PFD to default settings, including changing units to standard
Displays/removes DME Information Window (optional)
Cycles the Bearing 1 Information Window through:
NAV1: Waypoint frequency/identifier and DME information
GPS: Waypoint identifier and GPS distance information
ADF: Waypoint frequency
Off: Removes window
Displays the HSI as a 360° compass rose
Displays the HSI as a 140° viewable arc (Bearing Information Windows unavailable)
STBY ON ALT
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
(optional)
CDI ADF/DME XPDR IDENT
Press the CDI Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
(optional) (optional)
TERRAIN NEXRAD XM LTNG
Press the OFF or BACK Softkey to
return to the top-level softkeys.
BRG 2
360 HSI ARC HSI
Press the BRG1/BRG2 softkeys to display/
remove the Bearing Information windows
and cycle through bearing sources:
- NAV1/NAV2
- GPS
- ADF
Press the STD BARO or BACK Softkey
to return to the top-level softkeys.
XPDR
VFR CODE IDENT
Press the BACK Softkey to return
to the top-level softkeys.
SYSTEM OVERVIEW
TMR/REF NRST ALERTS
BACK ALERTS
STD BARO BACK ALERTS
BACK ALERTS
1-15