Garmin G1000 Pilot's Manual page 166

Beechcraft a36/g36 integrated flight deck
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

GPS NAVIGATION
'Auto Comment', when selected, will overwrite the currently selected user waypoint comment with an
automatically generated comment. Auto comments are in the same format as comments that are generated
for user waypoints that have not specified unique user waypoint comments. The auto comment can be one
of three styles:
• REF1BRG1 / DIS1 - if the user waypoint position is defined by a reference 1 waypoint radial and distance
(this is generally the default case, but the default case could also be the blank case if there are no reference
waypoints near the user waypoints position.
• REF1BRG1 / REF2BRG2 - if the user waypoint position is defined by a reference 1 waypoint radial and a
reference 2 waypoint radial
• BLANK - if no reference waypoints are near the user waypoints position
Overwriting the currently selected user waypoint's comment with an automatically generated
comment:
1) Select the desired waypoint on the User Waypoint Information Page.
2) Press the MENU Key. Select 'Auto Comment'.
3) Press the ENT Key.
'Rename User Waypoint' renames a user waypoint.
Renaming a user waypoint:
1) Select the User Waypoint Information Page.
2) Press the MENU Key (select 'Rename User Waypoint' and press the ENT Key) or press the RENAME Softkey.
3) The user waypoint field is highlighted. Rename the user waypoint.
4) Press the ENT Key.
5) The message 'Would you like to rename the user waypoint' is displayed. Select 'YES' to rename the new user
waypoint.
5-48
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
190-00595-00 Rev. A

Advertisement

Table of Contents
loading

Table of Contents