Garmin G1000 Pilot's Manual page 124

GPS NAVIGATION
Track Vector
The track vector as a dashed light blue line segment with an arrowhead attached to the end, extended to
a predicted location in 60 seconds along the current aircraft track (Figure 5-5). The track vector is useful
in minimizing track angle error.
Enabling/disabling the track vector:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'TRACK VECTOR' field.
6) Select 'On' or 'Off'.
7) Press the FMS Knob to return to the Navigation Map Page.
5-6
Track Vector
Figure 5-5 Track Vector
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36 190-00595-00 Rev. A