Garmin G1000 Pilot's Manual page 147

4) Press the ENT Key to confirm the selected waypoint.
5) Press the E NT Key to activate a direct-to.
Any waypoint contained in the flight plan can be selected as a direct-to destination from the Direct-to
Waypoint Window when navigating an active flight plan.
SPECIFYING A COURSE TO A WAYPOINT
When navigating a direct-to, the G1000 sets a direct great circle course to the selected destination. The
course to a destination can also be manually selected using the course field ('COURSE') on the Direct-to
Waypoint Window.
Manually selecting a direct-to course:
1) Press the Direct-to Key. The Direct-to Window is displayed with the destination field highlighted.
2) Highlight the course field.
3) Enter the desired course (Figure 5-22).
4) Press the ENT Key twice to begin navigation using the selected destination and course.
5) To reselect a direct course from the present position (or select a new manually defined course) press the Direct-
to Key. Press the ENT Key twice.
190-00595-00 Rev. A
Figure 5-22 Entering a Direct-to Course
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
GPS NAVIGATION
5-29