The Refrigerator/Freezer Needs Ventilation; Appliance Alignment - AEG SANTO Series Operating Instructions Manual

Electronic refrigerator/freezer
Hide thumbs Also See for SANTO Series:
Table of Contents

Advertisement

Installation

The refrigerator/freezer needs ventilation

Air is fed under the door through the
vent slots in the base and is exhausted
upwards along the back wall. To ensure
proper air circulation never cover or
alter the vent openings.
Important! If the appliance is installed
under a hanging cabinet, a clearance of
at least 10 cm between the top of the
appliance and the cabinet above it must
be maintained.
Please check whether, after installing
your appliance and especially after
reversing the door, the door seal seals
tightly. A badly fitting door seal may
lead to heavy frosting and a higher
power consumption (see also "What to
do if ...").

Appliance Alignment

The appliance must be level.
0
1. Please level out unevennesses in the
floor by screwing the two adjustable
front feet in or out using the 13 mm
spanner supplied. To do this remove
the plinth panel (see chapter
"Transporting the appliance")
12
818 37 09-01/6

Advertisement

Table of Contents
loading

Table of Contents