The Refrigerator/Freezer Needs Ventilation; Appliance Alignment - AEG SANTO 86378-KG Operating Instructions Manual

The refrigerator/freezer needs ventilation

Air is fed under the door through the
vent slots in the base and is exhausted
upwards along the back wall. To ensure
proper air circulation never cover or
alter the vent openings.
Important! If the appliance is installed
under a hanging cabinet, a clearance of
at least 10 cm between the top of the
appliance and the cabinet above it must
be maintained.
Please check whether, after installing
your appliance and especially after
reversing the door, the door seal seals
tightly. A badly fitting door seal may
lead to heavy frosting and a higher
power consumption (see also "What to
do if ...").
0
1. Remove the two wall spacers from
the appliance accessories pack and,
in accordance with the illustrations,
fix them at the top of the rear of the
appliance so that the distance from
the wall required for the necessary
ventilation is ensured.

Appliance Alignment

The appliance must stand on a firm horizontal surface.
0
1. Please level out unevennesses in the
floor by screwing the two adjustable
front feet in or out using the 13 mm
spanner supplied. To do this remove
the plinth panel (see chapter
"Transporting the appliance")
818 36 55-00/3
Installation
11