Temperature Adjustment - AEG SANTO Series Operating Instructions Manual

Electronic refrigerator/freezer
Hide thumbs Also See for SANTO Series:
Table of Contents

Advertisement

Temperature Adjustment

With the individual temperature setting buttons the desired
temperatures in the refrigerator and in the freezer compartment can be
adjusted independently of one another.
0
1. Press either the „+" (WARMER) or „-" (COLDER) button for the refriger-
ator or freezer compartment .
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
2. To adjust to a warmer temperature, press the „+" (WARMER) button. To
adjust to a colder temperature, press the „-" (COLDER) button. The
changed setting is immediately displayed on the temperature display.
Each time the button is pressed the temperature is adjusted by 1 °C.
Adjustable temperature range for the freezer compartment:
-15 °C to -24 °C.
Adjustable temperature range for the refrigerator compartment:
+3 °C to +8 °C, (HOLIDAY: +14 °C )
3
Note: +5 °C for the refrigerator compartment and -18 °C for the free-
zer compartment should be considered cold enough as a storage tem-
perature.
3. When the buttons are not further pressed after an adjustment has been
made, after a short period (approx. 5 sec.) the temperature display
switches over and again displays the ACTUAL temperature in the refrig-
erator compartment. The display changes from flashing to illuminated
numbers.
3
When the setting is changed, the compressor does not start immedi-
ately if automatic defrosting is currently taking place.
The display lighting switches itself on when any button is touched. If
no button is pressed, the display lighting switches itself off after
approx. 1 minute.
Important! Please check regularly on the warning display and on the
temperature display that the storage temperature is being maintained.
3
The appliance setting cannot be changed when the mains plug is pulled
out or there is no power supply.
When reconnected to the mains supply, the appliance takes on the
state it had at the time of the interruption to the power supply.
818 37 09-01/6
21

Advertisement

Table of Contents
loading

Table of Contents