The Refrigerator/Freezer Needs Ventilation; Appliance Alignment - AEG SANTO Santo Series Operating Instructions Manual

Installation

The refrigerator/freezer needs ventilation

Air is fed under the door through the
vent slots in the base and is
exhausted upwards along the back
wall. To ensure proper air circulation
never cover or alter the vent
openings.
Important! If the appliance is
installed under a hanging cabinet, a
clearance of at least 10 cm between
the top of the appliance and the
cabinet above it must be maintained.
Please check whether, after installing
your appliance and especially after
reversing the door, the door seal seals
tightly. A badly fitting door seal may
lead to heavy frosting and a higher
power consumption (see also "What
to do if ...").
0
1. Remove the two wall spacers
from the appliance accessories
pack and insert them into the
heat exchanger bars (condenser)
located at the top of the rear of
the appliance as per the illustra-
tion, so that the distance between
the back of the appliance and the
wall that is required for correct
ventilation is ensured.

Appliance Alignment

0
1. The appliance must be level. Please compensate for unevenness in the
floor by turning the two adjustable feet at the front.
10