Appliance Transport; Before Use; Packaging - AEG SANTO Series Operating Instructions Manual

Appliance Transport

Two persons are required to transport the appliance. Two handles are
provided on the back of the appliance at the top to enable a better
hold. Before transporting, the plinth cover must be removed to prevent
damage.
0
1. To remove the plinth cover from
the stops, tilt downwards and then
pull forwards.
Important: Do not damage door
contact (if present)
2. Grip the appliance with the
recessed handles positioned as in
the drawing, and transport the
appliance.
3. In order to push the appliance
into its final position, press care-
fully at the top of the door and
tip the appliance back slightly.
The weight is thus transferred to
the back wheels and the appliance can be easily pushed.
4. When the appliance is standing in the desired place, attach the plinth
cover. Make sure that the door contact (if present) is not damaged and
that it engages in the corresponding aperture in the plinth cover.

Before Use

Packaging

0
1. Remove all adhesive tape and packaging from the interior of the appli-
ance.
3
Any remnants of adhesive can be removed with white spirit.
2. Remove the transport protection pieces and pull off the adhesive tape.
8
818 37 09-01/6