Replacing The Light Bulb - AEG SANTO Series Operating Instructions Manual

What to do if ...
Symptom
Noise
If after the above checks there is still a fault, call your local AEG Service
Force Centre.
In-guarantee customers should ensure that the above checks have been
made as the engineer will make a charge if the fault is not a
mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service
calls.

Replacing the Light Bulb

3
For safety reasons the interior lighting switches off after 7 minutes
when the door is open. It switches on again the next time the door is
opened.
1
Warning! Danger of electrical shock! Before replacing the light bulb
switch off the appliance and remove the mains plug.
Light bulb specifications: 220-240 V, max. 25 W, fitting: E 14
0
1. To switch the appliance off press and hold the ON/OFF button.
2. Unplug the mains plug.
3. To change the light bulb, undo the
cross head screw and remove the
light bulb cover downwards.
4. Change the defective light bulb.
5. Refit the light bulb cover and the
cross head screw.
40
Possible Cause
Appliance is not level.
Solution
Readjust the front levelling
feet.
Refer to Normal Operating
Sounds
818 37 09-01/6