Mode Button; Text Display - AEG SANTO Series Operating Instructions Manual

Appliance Description

MODE button

The following operating modes can be selected:
– SHOPPING: Fridge temperature value 3 °C for 6 hours, cooling for
– FROSTMATIC: Cooling for the freezer section runs for 52 hours in
– COOLMATIC: Fridge temperature value 3 °C for 6 hours.
– FROSTMATIC and COOLMATIC:
– HOLIDAY:
–
0
1. Press MODE button once. In the display the operating mode SHOPPING
will flash.
2. After approx. 4 seconds the display stops flashing, the operating mode
SHOPPING is set.
3. If another operating mode is to be set, before 4 seconds have elapsed,
press the MODE button repeatedly until the desired mode is shown in
the display. After approx. 4 seconds have elapsed, the display stops
flashing, the operating mode is set. If the MODE button is pressed
again, the next operating mode appears in the display.
3
To return to normal operation, press the MODE button repeatedly until
no words appear in the display ("

Text display

• Operating modes: SHOPPING, FROSTMATIC, COOLMATIC, FROSTMATIC
and COOLMATIC, HOLIDAY, empty field when operating normally.
• Alarm: DOOR OPEN when the doors of the appliance have been open
for too long, TEMPERATURE when there is a temperature warning
• After power cut: POWER displayed
• Electrical fault: SERVICE displayed
18
Different operating modes can be set using the MODE
button.
freezer section runs for 1 hour in continuous operation.
continuous operation.
Cooling for freezer section runs for 52 hours in
continuous operation, fridge temperature value 3 °C for
6 hours.
Fridge temperature value 14 °C.
: Normal operation according to the required
temperatures set.
The names of the various operating modes that can be set
with the MODE button and the words indicating an alarm,
power cut or electrical fault appear in the text display.
").
818 37 09-01/6