Table of Contents
Advertisement
Available languages
Available languages
34
Technical data
At the same time, free the middle hook
and slide off the cover in the direction of
the arrows.
3. Replace the used lamp with a new lamp
of the same type and specifically de-
signed for household appliances and hav-
ing the same characteristics.
4. Install the lamp cover.
5. Connect the mains plug to the mains
socket.
6. Open the door. Make sure that the lamp
comes on.
If you want to maintain the light on with the door closed, it is sufficient to open and
close the door and the light will remain ON automatically for 10 minutes.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.
TECHNICAL DATA
Dimension of the recess
The technical information are situated in the rating plate on the internal left side of the
appliance and in the energy label.
INSTALLATION
Positioning
WARNING!
If you are discarding an old appliance that has a lock or catch on the door, you must
ensure that it is made unusable to prevent young children being trapped inside.
The appliance shall have the plug accessible after installation.
Height
Width
Depth
1780 mm
560 mm
550 mm
Advertisement
Table of Contents
