3 Get started
Caution
•
Make sure that you have read the safety instructions in
the 'Important safety instructions' section before you
connect and install your handset.
Connect the base station
Warning
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the phone.
•
Use only the supplied power adapter to charge the
batteries.
Note
•
If you subscribe to the digital subscriber line (DSL) high
speed internet service through your telephone line,
noise and caller ID problems caused by the DSL
contact your DSL service provider.
•
The type plate is located on the bottom of the base
station.
1
Connect each end of the power adapter
to:
•
the DC input jack of the base station;
•
the power socket on the wall.
2
Connect each end of the line cord to:
•
the telephone socket of the base
station;
•
the telephone socket on the wall.
D260
D265
3
Connect each end of the power adapter
to (for multi handset version only):
•
the DC input jack at the bottom of the
extra handset charger.
•
the power socket on the wall.
EN
7