Remove The Battery; Insert The Sim Card - UTStarcom UT1200 User Manual

Remove the battery

2.1.2
To remove the battery, pull the edge outwards, then remove the battery by pulling it up
from the bottom. You may lose all your personal settings if you remove the battery when

Insert the SIM card

2.1.3
Slide the SIM card holder to unlock it and then lift it up on its hinge. Remove the SIM card
from its protective holder and place it in the space provided, making sure that the
clipped corner of the card is in the correct corner and that the gold contacts are facing
down.Close the card holder and slide it into the locked position.
V 2006-6-7
the phone is switched on.
15/74