Receiving Mms; Create New Mms - UTStarcom UT1200 User Manual

Receiving MMS

9.3.1
If someone sends you an MMS, an icon and a sound alert will inform. If the sender of
the message has asked for a Read report, a prompt will ask you to send it or not. Once
the MMS is downloaded, it is available in MMS > Inbox (see below).
If the size of the MMS to download is bigger than the memory available in your phone,
you must free memory by deleting data (picture, sounds, etc.).

Create New MMS

9.3.2
When you select Create MMS, you are first asked to enter the contact to whom you wish
to send the MMS. You can select one or more existing contacts or enter a new mobile
phone number. Next you will be asked to Add media. In the MMS creation screen, five
icons allow you to add a Picture, add Text, add Sound, Send the message or access the
MMS options. Use ▲ or ▼to move from one option to the next and press[OK] or Left
1. Design your message: add a Picture, a Text and/or a Sound. Press ▶ to create
2. The last icon on the left-hand side lets you access the MMS options (see below).
3. Select Send: to send the MMS to the selected recipient(s).
Pictures are chosen from the Picture album. Copyright protected pictures cannot be
sent via MMS. Sounds can be chosen from the Sound Album melodies. If you wish to
send a sound memo, you need to record it when creating the MMS. In this case, in
Sound... menu, select <Records>, then <New> and follow the procedure that appears
on the screen. Recordings previously saved cannot be sent via MMS. The following
options are available when creating new MMS messages:
Edit subject: To edit and change or enter the subject of your message.
Save as draft: To save your message as a draft that you can edit, complete and send
V 2006-6-7
in order to be able to view your message.
softkey to access the menu.
more slides.
later on.
44/74