Answering A Second Call; Answering A Third Call - UTStarcom UT1200 User Manual

phone, dial a number (or select a contact in the phonebook) and press Pick up key. The
first call is put on hold (the number is displayed on the bottom of the screen) and the
second number is dialed. You can then press [OK] to access the options among which
•Switch calls to toggle between calls (you can also press ◀or ▶ to switch calls).
•Transfer to connect the two calls. You are disconnected when the transfer is
•Conference to introduce the caller into a conference call.

Answering a second call

3.4.2
When you receive a second call while being already in communication, the phone emits
a beep alert and the screen displays Call waiting. You can then:
Press Pick up key
Press Red key
Press [OK] or Left softkey Options
to end the current call, then answer the incoming call.
To receive a second call, you must have deactivated the Call forward for voice calls and

Answering a third call

3.4.3
If you are in a call and have one call on hold, you can also receive a third call. To do so,
you must either end one of the calls or introduce the new caller to a conference.
Press Red key
Press [OK] or Left softkey Options
answer the incoming call, or End call to end the current call, then answer the incoming
call. This service is limited to two current communications (one active and one on hold).
V 2006-6-7
are:
completed.
To answer the call (the first one is put on hold).
To open the options list. You can select End Call
activated the Call waiting.
To open the options list. You can select Accept to
20/74
To reject the call.
To reject the call.