Taking A Break / Finishing; Maintenance / Care - Vogt Hammer VH 10 Manual

4.1 Taking a break / Finishing

Interrupt the compressed air supply from the compressed air hose to the equipment.
• In the case of taking a break:
• Place the secured equipment aside.
• Cover any sharp or pointy tools in the equipment, if applicable.
When finishing work:
• Interrupt the compressed air supply.
• Remove the tool from the equipment.
• Check whether there is a film of oil on the tool holder.
• If this is not the case, add a few drops of VOGT Special Oil to the connection hose and put the
equipment into operation without a tool for approx. 15 seconds.
• Clean the VOGT compressed air equipment, tools, hose and other accessories with a dry or oil-
containing clean cloth.
• Store your VOGT compressed air equipment in the provided metal transport case whenever possible.

5 Maintenance / Care

Contact:
+49(0)92 78-774 33-0
+49(0)92 78-774 33-11
www.vogt-tec.de
When pressing the A button on the coupling, the system is released
only after it has been fully and automatically vented in accordance
with DIN ISO 4414.
When the system has been fully vented, pull off the hose.
The equipment is maintenance-free if you ensure a regular supply of oil to the
equipment.
Subject to change without notice
31
EN