Bar Display; How To Connect Each Part; Connecting Motor Handpiece - DENTSPLY X-SMART User Manual

4.12

Bar Display

LCD
5

How to connect each part

5.1

Connecting Motor Handpiece

Align the mark of the cord plug of the
motor handpiece with the ▲ mark of the
motor handpiece connector and insert
the plug until it locks (see Fig. 3).
NOTICE
To remove the plug, hold the plug ring and pull it out.
JAP / F190270.EN / 07 / 2004 / updated 10/2015
It displays the bar graph which shows the degree of load
applied to the motor while the file is in motion.
How to connect each part
Motor handpiece
connection
Fig. 3
17/48