Siemens SINAMICS G120 Getting Started page 6

Safety information
Objective of these instructions
This Getting Started describes how you commission and operate a SINAMICS G120
frequency converter using the Application Wizards of the IOP. For special frequency
converter functions, e.g. the automatic restart or flying restart function, please use the
Operating Instructions and the List Manual of the corresponding Control Unit.
The functions and properties of the IOP are described in detail in the "SINAMICS IOP"
operating instructions and are only explained here to an extent that is necessary to
understand the described functions.
Additional information on SINAMICS G120
All manuals for SINAMICS G120 frequency converters can be downloaded from the Internet:
Manuals (http://support.automation.siemens.com/WW/view/en/22339653/133300)
and are additionally available on DVD:
SINAMICS Manual Collection – all of the manuals on low-voltage motors, geared motors,
and low-voltage frequency converters, 5 languages
Order number: 6SL3097-4CA00-0YG0
What is the meaning of the symbols in the manual?
Firmware upgrade and downgrade
Options for upgrading and downgrading the firmware can be found on the Internet at
http://support.automation.siemens.com/WW/view/de/67364620
(http://support.automation.siemens.com/WW/news/en/67364620).
6
An operating instruction starts here.
This concludes the operating instruction.
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
Getting Started, 11/2013, A5E32885834B AA