Engine V85 E4
•
Before assembly, take careful note of
the coupling classes.
•
Assemble the connecting rod on the
crankpin in the crankcase, tightening
the screws to the indicated torque.
Refitting the crankcase halves
•
Insert the small ends timing system
side and flywheel side on both crank-
cases paying attention to lubricate
them
•
With the help of grease, place the thrusts on the upper crankcase from the flywheel side,
paying attention to lubricate them in the friction area
CAUTION
THE MOUNTING DIRECTION OF THE THRUSTS IS UNIQUE
Engine
ENG - 77