Engine
•
After inserting the two half-cones (1) on
the thrust plate (2), insert it on the
clutch shaft working from the cardan
side and paying attention to the orien-
tation, as the machining must push on
the cap once the reassembling of the
gearbox on the engine is complete.
•
Insert the intermediate body (3), the
thrust bearing (4) and two related slid-
ing washers (5) and the external body
(6).
Gear selector
Removing the gear selector
•
Remove the desmodromic shaft first
and then the complete gear selector
shaft (1).
•
Remove the spring from the index lever
(2)
ENG - 30
Engine V85 E4