Tightening Torques - MOTO GUZZI V85 E4 Manual

Engine V85 E4

Tightening Torques

If the following tables do not expressly indicate the tightening torque values, refer to the table with the
generic torque values indicated below.
Metric tightening torque: TE - TEFL - SHC - TBEI
- TCC - TS
G
ENERAL TIGHTENING TORQUES FOR SELF TAPPING SCREWS FOR PLASTIC
Tightening torque
CAUTION
THE SCREWS WITH THREAD-LOCK SEALANT (PRE-IMPREGNATED) MUST BE REPLACED
WITH NEW SCREWS AFTER THEY HAVE BEEN LOOSENED.
BEFORE FITTING THE NEW SCREWS, CLEAN THE THREADED HOLES CAREFULLY, MAKING
SURE THAT ALL TRACES OF THE OLD THREAD-LOCK SEALANT HAVE BEEN ELIMINATED.
G
ENERAL TIGHTENING TORQUES
M4 M5
3 Nm (2.21 6 Nm (4.43
lb ft) lb ft)
2.9 mm
2 Nm (1.48 lb ft) 2 Nm (1.48 lb ft)
M6 M8
10 Nm 25 Nm 50 Nm
(7.38 lb ft) (18.44 lb ft) (36.88 lb ft)
3.9 mm 4.2 mm
3 Nm (2.21 lb ft)
Characteristics
M10 M12
80 Nm
(59.00 lb ft)
5 mm
3 Nm (2.21 lb ft)
CHAR - 7