MOTO GUZZI V85 E4 Manual page 43

Engine V85 E4
•
Place the starter sprocket and screw
the fixing screws by hand
•
Using the special tool for the centring
of the clutch plate
Specific tooling
021002Y Clutch centring
•
Insert the six fastening screws at the
recommended torque.
Bushing selection
CRANKSHAFT - CRANKCASE BUSHINGS
The crankcase class is stamped in the following locations:
•
Above the crankshaft hole on the alternator side.
•
Next to the crankshaft hole on the clutch side.
Engine
ENG - 43