1. Manuals
  2. Brands
  3. DMX4ALL Manuals
  4. Controller
  5. ArtNet Player 4
  6. User manual

DMX4ALL ArtNet Player 4 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ArtNet Player 4
Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ArtNet Player 4 and is the answer not in the manual?

Questions and answers

Related Manuals for DMX4ALL ArtNet Player 4

Summary of Contents for DMX4ALL ArtNet Player 4

  • Page 1 ArtNet Player 4 Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd.
  • Page 2 ArtNet Player 4 Description The ArtNet Player 4 is a 4 universe ArtNet-Player and a 1 universe DMX-Player. Stored programs on a SD-Card can be outputted Stand-Alone. The DMX-Output displays the first DMX-Universe, so DMX capable devices can be controlled directly with the ArtNet Player 4.

  • Page 3: Data Sheet

    70mm x 90 mm x 60mm SD-Card The ArtNet Player 4 needs a SD-card for the program memory. It will be inserted with the contacts downwards and the tapered side to the right. By inserting the SD-card slide in the card as far as a clicking sound is audible and a resistance is perceptible.

  • Page 4: Led Display

    ArtNet Player 4 Connection POWER DMX IN DMX OUT ArtNet-Player 4 SD-CARD EXTERNAL CONTROL LED-Display Connected with a net work cable the LAN-LED flashes. STATUS Flashing: No SD-Card inserted Lights permanently: ArtNet Player 4 works normally...
  • Page 5 After creating the programs, the export is to process under Project→Export→ArtNet Player 4: The area ArtNet Player Settings contains the ArtNet Player 4 devices settings. These will be explained on the following pages. Load settings from File reads the device settings from an existing file which is created before.

  • Page 6: Device Settings

    Under ... you have to specify the path where the files should be written. Please choose directly the SD-Card and don’t create a folder to use the SD-Card directly in the ArtNet Player 4 afterwards! Export starts the export-process. Device Settings Under Device the ArtNet Player settings the IP and the subnet mask will be adjusted for the ArtNet Player 4.
  • Page 7 ArtNet Player 4 Universe Settings For each universe the target-settings must be specified within the tabs Universe 1 up to Universe 4. The option Enable ArtNet-Output must be activated for an ArtNet-Output. The Destination-IP shows the target-devices IP to which the universe should be send.

  • Page 8: Remote Settings

    ArtNet Player 4 Remote Settings The DMX-Input, ArtNet-Input or the APP “DMX4ALL Remote” (Android) can be used as remote control for the ArtNet Player 4. Activate within the configurations the Remote-Function, you would like to use and adjust the according parameters.

  • Page 9: Digital Inputs

    ArtNet Player 4 Digital Inputs The 4 digital inputs are supposed to controlling with remote buttons. You can run the inputs with a switching contact to GND: The inputs are not potential-free. Which function is to execute as output is to set under Inputs: Next Program Switch to the next program.
  • Page 10 After starting the App the first time the ArtNet Player 4s IP must signed in the settings After leaving the settings, the programs are load to the ArtNet Player 4 and shown in the list. By tipping the programs name in the list the according program will be executed in the ArtNet Player 4.
  • Page 11 ArtNet Player 4 By tipping the running program will be stopped. By tipping the running program will be played further. Tipping to turns off the output respectively on. If the Blackout- Function is activated this button will be displayed in red.
  • Page 12 ArtNet Player 4 Execute the Firmware-Update The ArtNet Player 4 has a Firmware-Update-Function, which allows transfer future Firmware-Versions. A Firmware-Update will be executed via the SD-card. Please proceed as follows: Copy Firmware-file (firmware.bin) to SD-card Turn off ArtNet Player 4...
  • Page 13 ArtNet Player 4 Accessories Power supply 12V / 20W...
  • Page 14 ArtNet Player 4 CE-Conformity This assembly (board) is controlled by a microprocessor and uses high frequency. In order to maintain the properties of the module with regard to CE conformity, installation into a closed metal housing in accordance with the EMC directive 2014/30/EU is necessary.
  • Page 15 Germany Last Change: 27.02.2018 © Copyright DMX4ALL GmbH All rights reserve. No part of this manual may be reproduced in any form (photocopy, pressure, microfilm or in another procedure) without written permission or processed, multiplied or spread using electronic systems.

Table of Contents