ABC Design Tandem Instructions For Use Manual page 10

7. Unfastening the harness
To unfasten the harness, press the button (1) slightly offset to the left and right.
CAUTION: Always use the shoulder harness and lap belt together.
8. Adjusting the front and rear backrests
To adjust the backrest, pull the retainer on the rear of the backrest upwards and then adjust the height.
When you have reached the required position, let go of the retainer to allow the seat to remain in that
position.
NB:
The front backrest can be reclined halfway and the rear one can be fully reclined.
9. Adjusting the footrest
To raise the footrest, hook the retainer under the footrest into the bracket.
To lower the footrest, unhook the retainer.
10. Locking and unlocking the swivelling wheels
a. Push the lever up to lock the wheels.
b. Push the lever down for swivel position.
11. Folding the double buggy
a. Move the front wheels to the position shown.
NB: When you want to use the buggy again you must release the wheels.
If you leave the wheels in this position, you will damage the wheels in the long run.
b. Put the backrests in upright position and fold the footrest all the way down.
Disengage the locking mechanism with your foot and press the handle forwards slightly.
c. Now press the second catch and push the buggy handle forwards.
d. The buggy can now be folded down and the transportation lock applied.
Note: To unfold the pushchair, follow the instructions in point 1 "Opening the pushchair".
Caution: Ensure that all the catches are engaged before use.
EN - 06