Ice-Crushing; Customer Service; Cleaning And Care - AEG M 156 series Operating Instructions Manual

2-Way safety system
A 2-way safety system prevents the
blender from being operated unless the
jar and the lid are locked into position.
Nevertheless, always keep children
1
away from the appliance!

Ice-crushing

The blender is suited for ice-crushing.
Always pour some water into the jar
before starting the ice-crushing.
0 Pour the water into the jar.
0 Turn the blender on. Any speed can be
used, but it is recommended to use the
Pulse button since the ice is crushed
very fast.
0 Add the ice to the jar through the
pouring hole in the lid while the
blender is running.

Cleaning and care

Always pull out the mains plug before
1
cleaning the blender.
Make sure no water enters the inside of
1
the appliance!
Clean the housing with a damp cloth.
1
Never clean the motor base of the
appliance under running water or
submerge it in washing-up water.
With the Pulse button the jar and the
3
blade assembly can be easily and
securely cleaned.
0 Pour warm water and some drops of
washing liquid into the jar.
0 Mix the liquid by pressing the Pulse
button for a short while.
0 Rinse the jar under running water.
0 Clean the motor base by whipping it
with a damp cloth.
Should there be a need, the blade
3
assembly can be cleaned separately.
When you replace the blade assembly,
turn it anti-clockwise. See also
"Assembling the Blender" section.
Only use water and dishwashing liquid
1
to clean the blender. Never put any
parts in the dishwasher.

Customer Service

Our appliances comply with the high-
est quality standards. If nevertheless a
problem should arise for which you can
find no solution in the operating
instructions, please contact your dealer
or the AEG customer services dept.
g
9