Dear Customer; Description Of The Appliance (Fig 1); Safety Instructions - AEG M 156 series Operating Instructions Manual

g

Dear Customer,

Please read these operating instruc-
tions through carefully. Above all
please follow the safety instructions on
the first few pages of these operating
instructions! Please keep the operating
instructions for future reference. If
applicable pass these instructions on to
the next owner of the appliance.
Description of the appliance
(fig 1)
A Pouring hole cover
B Lid
C Spout
D Jar
E Blade assembly
F Rubber sealing ring
G Motor base
H Stop button
J Speed buttons (1, 2 and 3)
K Pulse button
L Non-slip rubber feet (not shown)
M Rating label
1

Safety instructions

The safety standards of AEG electric
appliances are in keeping with the rec-
ognised rules of technology and the
law governing the safety of appliances.
Nevertheless as a manufacturer we are
committed to familiarise you with the
following safety instructions:
General safety
• The appliance may only be connected
to a power supply whose voltage and
frequency comply with the specifica-
ti-ons on the rating plate!
• Never pick up the blender if
– the lead is damaged,
– the housing is damaged.
• Never use the lead to pull the plug out
from the socket.
• In order to avoid danger, if the connec--
tion lead of this appliance is damaged,
it must be replaced by the manufac-
tu-rer, its customer service dept. or a
simi-larly qualified person.
• Repairs to the appliance may only be
carried out by trained personnel. As a
result of incorrect repairs considerable
dangers for the user may result. Please
contact the AEG customer service
department or your dealer in the event
of repairs being necessary.
Safety of children
Never leave the appliance unattended
when on and supervise particularly
carefully if young children are around!
When using your blender
• Never use the blender if you have wet
hands.
• Plastic parts may not be placed on or
directly near to heaters.
• Do not use this appliance to stir paints
(lacquers, polyesters etc.) This could
result in an explosion!
• The appliance should be switched off
and unplugged before any cleaning or
maintenance work is done on it.
• The blade assembly is only to be dis-
mantled by authorised service engi-
neers.
• Never clean the appliance under run-
ning water or submerge it in washing-
up water.
• Do not hold any hard objects (e.g. a
spoon) in the blade when running and
do not reach into the blender jar with
your hands. There is a risk of injury!
• The manufacturer is not liable for any
damages which are caused by using the
appliance for any other purpose than
that intended or incorrect use.
• When you have finished working with
the appliance, switch it off and unplug
ist from the electricity supply.
g
7