Motorola CPEo 400 Series Manual page 38

Control Panel Menu
Table 4-7 System Tab Fields (Continued)
Auto Refresh Interval
Re-bootstrap EMS (Element Management
System)
Enable Buzzer
About Tab
The About Tab will display basic properties of your CPE device such as: Product Name, Model
ID, Hardware Version, Serial Number and the WiMAX MAC Address.
4-8
Field or Button
Chapter 4: Advanced Configuration
Description
Enter, in seconds, the interval for status
Auto Refresh. Valid range is 1 second - 9999
seconds.
Check this box to reconnect the device with
the EMS.
NOTE
Only perform this function under
the supervision of a Customer
Support Representative.
Check this box to enable/disable the buzzer
for the initial set-up and installation of
your CPE device. The default is enabled
(checked).
68P09285A67-D
MAR 2008