Local Address Menu
Figure 4-2 CPE Local Address Menu
DHCP Server Tab
The DHCP Server Tab enables Dynamic Host Configuration Protocol (DHCP) server functionality
on the LAN, allowing the CPE to dynamically assign lease IP addresses to clients that connect to
it from the local network. Be sure to click the Apply button when finished making any changes
Table 4-3 DHCP Server Fields
Enable DHCP Server
DHCP Server IP Address
DHCP Starting IP Address
4-4
Field or Button
Chapter 4: Advanced Configuration
Description
If selected, the DHCP server on the gateway
assigns IP addresses to the computers and
other hosts on your network if they have
DHCP enabled. By default, the gateway
server is enabled. If there is another DHCP
server running on your network (on another
router), you must disable one of the DHCP
servers.
Enter the port forwarding LAN Client IP
Address.
Sets the first IP address assigned by the
DHCP server, in dotted-decimal format. It
must be greater than the IP address value of
the gateway. For example, if the IP address
of the gateway is 192.168.15.1 (default), the
starting IP address must be 192.168.15.2
(or higher)
Continued
68P09285A67-D
MAR 2008