Spray Vacuum Cleaning - AEG VAMPYR Multi Operating Instructions Manual

Spray vacuum cleaning

0 Only spray vacuum those surfaces and upholstery which are suitable to
be wet vacuum cleaned. Do not wet fragile hand-woven carpets or
carpets which are not colour-fast.
Caution: When spray vacuum cleaning be sure to use only AEG
detergent with foam inhibitor for spray vacuum appliances.
Preparation:
0 Prior to treating a carpet for the first time, test the fastness of the
colour by applying some detergent concentrate to a white cloth and
rub it onto a patch of carpet that is not so visible.
If no traces of colour remain on the cloth, the carpet can be cleaned
using water. In any other event, do not use water when cleaning the
carpet.
Prior to spray vacuum cleaning carpets, thoroughly vacuum the entire
area in order to remove any loose dirt in advance.
Before commencing spray vacuuming always remove the paper filter
and the foam filter.
Pour water and detergent concentrate into the
0
detergent tank: 20 ml detergent concentrate per
litre of water.
Use only lukewarm water, as higher
temperatures could damage the appliance and
carpets and upholstery.
Place the detergent tank inside the dust
container.
To draw up the cleaning liquid out of the tank,
0
free the thin hose located on the motor head
from where it has been fastened.
Then attach the motor head on the dust
container such that the switch is located
vertically above the suction hole. When doing
this, ensure that the thin hose is immersed in the
cleaning liquid.
Then press the two vice action latches.
46