DSP-4000 Series
Getting Started Guide
Permanent Link Interface Adapters
(DSP-4000PL/4300)
Caution
To avoid damaging the adapter and to ensure
maximum accuracy of test results, never
pinch, kink, or crush the adapter's cable.
Never use the cable as a handle to pick up
the DSP test tool. Follow the handling
guidelines given in Figures 3 and 4.
For the best accuracy, keep the adapter's
cable as straight as possible during testing.
To avoid latent or immediate damage due to
electrostatic discharge:
•
Before handling a module or an adapter with
no module attached, ground yourself when
possible by touching a grounded, conductive
surface.
•
Always remove the adapter from the DSP test
tool before changing the personality module.
•
Always keep a personality module attached
to the adapter cable.
12
•
Tighten the screw snugly with your fingers
only. Do not overtighten. Doing so can
damage the module or the end of the cable.
•
Always store the personality module in its
original, static protection bag when not in
use.
˚
360
twist maximum
Figure 3. Permanent Link Adapter Handling
Guidelines
4" (10 cm)
minimum bend
Storage
ank85f.eps