Table of Contents
Advertisement
Install and remove programs
To install programs on your HP iPAQ:
1.
Use the mini-USB synchronization cable to connect your HP iPAQ to your computer.
2.
Follow the instructions in the Installation Wizard provided with the program you want to install.
3.
Check the screen of your HP iPAQ to see if any further steps are necessary to complete the
program installation.
To remove programs from your HP iPAQ:
1.
Tap Start > Settings > System > Remove Programs.
2.
Select the check box for the program(s) you want to remove, and then tap Remove.
NOTE:
By removing a program from your HP iPAQ, you might increase available memory on the
device. You can also remove the unused programs from your device to increase the available memory.
If programs are lost from your HP iPAQ for any reason, most of them can be re-installed using any
synchronization software. On your computer, click Options > Add/Remove Programs > check the
program to be added > click OK.
Open and close programs
You do not need to exit a program to open another or to conserve memory. The system manages
memory automatically.
To open a program, tap Start, and then tap the program you want from the list. If you do not see the
program you want, tap Start > Programs.
In most cases, programs automatically stop to free required memory. However, you can choose to close
programs manually.
1.
Tap Start > Settings > System > Memory > Running Programs.
2.
In the Running Programs list, tap the program you want to close, and then tap Stop.
Set alarms and clocks
To set alarm on your HP iPAQ:
1.
Tap Start > Settings > System > Clock & Alarms > Alarms.
2.
Tap <Description> to enter a name for the alarm.
3.
Tap the day of the week for the alarm. You can select multiple days by tapping each required day.
4.
Tap the Time tab and set the time for the alarm.
5.
Tap
sound.
6.
If you choose to play a sound, tap the list next to the Play sound check box, and then tap the sound
you want to set.
To set time on your HP iPAQ:
1.
Tap Start > Settings > System > Clock & Alarms > Time.
2.
Select Home to set the time zone, local time, and date when you are in your home country. Select
Visiting to set these options while traveling.
16
Chapter 5 Learn the basics
(Alarm) icon to specify the type of alarm. You can choose single sound or a repeating
Advertisement
Table of Contents
