Table of Contents
Advertisement
The Resolution settings can be changed to:
●
QVGA – 320 X 240
●
VGA – 640 X 480
●
1M – 1280 X 960
●
1.3M – 1280 X 1024
●
2M – 1600 X 1200
●
3M – 2048 X 1536
NOTE:
The larger the resolution you choose, the more the storage space required and it might take
longer to send such photos by Multimedia Messaging Service (MMS), e-mail, or Bluetooth.
Change mode settings
1.
Tap Start > Programs > Camera.
2.
Tap the
3.
On the Photo tab, select the required setting from the Capture mode list.
4.
Make the necessary changes and tap ok.
Mode settings can be changed to:
●
Normal – Set this default mode when you capture photos.
●
Timer – Set the self-timer to the time duration after which the camera captures photo on pressing
the Camera key.
●
Burst – Set the maximum number of photos that can be taken at a time.
●
Frame – Set the type of frame.
●
Panorama horizontal – Set to panorama horizontal to capture vast landscapes, city skylines, and
other landscapes.
●
Panorama vertical – Placeholder- more information required.
NOTE:
You can also tap the
Video recorder
Record videos
You can use the built-in camcorder on your HP iPAQ to create short videos and share them with your
friends and family.
1.
Tap Start > Programs > Camera.
2.
Tap
3.
Press the Camera key to start recording. Press the Camera key again to stop recording.
34
Chapter 7 Camera
(Settings) button.
(Frame) button to change the frame type.
(Video) button to go into the video mode.
Advertisement
Table of Contents
