Step: Installing The Sample Project - Siemens Simatic S7-300 31xC Series Getting Started Manual

Learning units

3.2 2. Step: Installing the sample project

3.2 2. Step: Installing the sample project
Introduction
When installing the sample project, you have the following options:
Installing from CD
1. Take the CD out of the Technological Functions operating instructions.
2. Start the installation program on the CD by double-clicking on the SETUP.EXE file in the
3. Now follow the instructions in the installation program.
Installing from the Internet
1. Open the directory with the sample projects.
2. Start the installation program by double-clicking the SETUP.EXE file.
3. Now follow the instructions in the installation program.
14
SETUP folder.
The installation program is started.
The installation program is started.
First Steps in Commissioning CPU 31xC: Positioning with digital output
Getting Started, 08/2011, A5E00105533-03